Discussion:
Is there any one out there that owns an Iwill board anymore
(too old to reply)
Kaptain Krunch
2004-06-02 00:11:28 UTC
Permalink
what happened to this group??? Am I the only one monitoring this one?


K.K.
Eric
2004-06-03 03:27:56 UTC
Permalink
No you are not the only one. I too monitor this group. You are not alone.
My Iwill motherboard is ancient by today's standards but it still works.
I'm running the DVD 266-uRN mother board with dual 1.13 GHz processors.
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
Mr. Chuck
2004-06-04 01:30:10 UTC
Permalink
Me too... Dvd 266-uRN w/ dual PIII 1Ghz

Mrc.
Post by Eric
No you are not the only one. I too monitor this group. You are not alone.
My Iwill motherboard is ancient by today's standards but it still works.
I'm running the DVD 266-uRN mother board with dual 1.13 GHz processors.
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
kev
2004-06-04 01:33:00 UTC
Permalink
On 03 Jun 2004, the world was enlightened by Mr. Chuck's opinion about...
Post by Mr. Chuck
Me too... Dvd 266-uRN w/ dual PIII 1Ghz
Mrc.
Post by Eric
No you are not the only one. I too monitor this group. You are not
alone.
Post by Eric
My Iwill motherboard is ancient by today's standards but it still works.
I'm running the DVD 266-uRN mother board with dual 1.13 GHz
processors.
Post by Mr. Chuck
Post by Eric
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
I'm lurking too. Two XP333s w/1800+ running perfectly


kev
--
Civilization.

An organized system of alternatives to the stone age - CJCherryh

The Eeeevil Cabal's Nine of Spades

Declared Hero of alt.tv.star-trek.tos by the ToolPackinMama on 14.09.2003
Deliverer of the Comfy Pillow
Kaptain Krunch
2004-06-07 18:17:25 UTC
Permalink
I am running a KK266 +R IWILL board 2 years no problems, other then the
northbridge fan going south. I have to say impeccable engineering for
IWILL. alas their are no good IWILL boards on the new side... they are
mostly Pentium's. Any one got a 400 board from IWILL?

Cheers

K.K.
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
Nikolaos Tampakis
2004-06-10 20:54:20 UTC
Permalink
Post by Kaptain Krunch
I am running a KK266 +R IWILL board 2 years no problems, other then the
northbridge fan going south. I have to say impeccable engineering for
IWILL. alas their are no good IWILL boards on the new side... they are
mostly Pentium's. Any one got a 400 board from IWILL?
Cheers
K.K.
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
I keep an eye too but there's nothing going on. I have a couple of
DVD266u-RNs. Yes their enginnering is pretty high-standards. There's not
much for consumer-level buyers to find in Iwill, might be why the
group's gone silent.

Regards
Nikos
Kaptain Krunch
2004-06-13 19:15:13 UTC
Permalink
Yes, I agree...they are a little above the consumer level...but like I said,
more for p4's and zeon's... I am AMD all the way...and I think IWILL has
shyed away from that market and is for the higher cost processors.

K.K
Post by Nikolaos Tampakis
Post by Kaptain Krunch
I am running a KK266 +R IWILL board 2 years no problems, other then the
northbridge fan going south. I have to say impeccable engineering for
IWILL. alas their are no good IWILL boards on the new side... they are
mostly Pentium's. Any one got a 400 board from IWILL?
Cheers
K.K.
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
I keep an eye too but there's nothing going on. I have a couple of
DVD266u-RNs. Yes their enginnering is pretty high-standards. There's not
much for consumer-level buyers to find in Iwill, might be why the
group's gone silent.
Regards
Nikos
n***@haha.com
2004-06-18 07:58:19 UTC
Permalink
True, but the new DK8N and eventually DK8E and DK8E2 will touch down
and people will take interest again.


On Sun, 13 Jun 2004 15:15:13 -0400, "Kaptain Krunch"
Post by Kaptain Krunch
Yes, I agree...they are a little above the consumer level...but like I said,
more for p4's and zeon's... I am AMD all the way...and I think IWILL has
shyed away from that market and is for the higher cost processors.
K.K
Post by Nikolaos Tampakis
Post by Kaptain Krunch
I am running a KK266 +R IWILL board 2 years no problems, other then the
northbridge fan going south. I have to say impeccable engineering for
IWILL. alas their are no good IWILL boards on the new side... they are
mostly Pentium's. Any one got a 400 board from IWILL?
Cheers
K.K.
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
I keep an eye too but there's nothing going on. I have a couple of
DVD266u-RNs. Yes their enginnering is pretty high-standards. There's not
much for consumer-level buyers to find in Iwill, might be why the
group's gone silent.
Regards
Nikos
OldFartJAC
2004-06-20 04:08:39 UTC
Permalink
I have 2 IWill KK266 machines that I built still running for over 3 years
now. My wife has one and my son has one. I am running a P4 2.GHz on an Abit
board.
Post by Kaptain Krunch
what happened to this group??? Am I the only one monitoring this one?
K.K.
Loading...